天天日夜夜,久久老女人,人人爱国产,91视频青青草

眾鎢擠出機(連續擠出成型機、押出機)采用歐美**先進技術操作簡單，效率高(是國內普通模壓設備的8-10倍),是目前國內先進的硬質合金實芯、單直孔、雙直孔、雙螺旋、三螺旋等棒材及板材的生產設備;同時也是陶瓷行業、純鎢、純鉬、銅基、鎳基、鐵基等行業擠出實芯棒、管棒、板材等的生產設備。
Zhongwu extruder (continuous extrusion molding machine, extrusion machine) uses most advanced European technology. is easy to manipulate. highly fficient (8-10 times domestic ordinary molding equipments).It is the most advanced domestic production equipment for solid hard alloy, single straight hole, double straight hole, double helix, three screw bar and plate. It is also being used to extrude solid bar, tube, and plate for ceramic, pure lungsten, molybdenum, copper- based, nickel-based, iron-based and other industries.

 1、主要性能說明Main Performance Specification
●眾鎢高效擠出機生產出的坯料,表面光滑、分布均勻、無氣泡產生、有效解決了使用模壓設備易產生局部密度不均勻問題。
●主機采用PLc控制,無級調速,電子調壓,超壓自動泄壓根據客戶需要可采用觸摸屏和手動控制面板。
●料缸可自動翻轉,裝料方便,容量大,不藏料,易清潔,是螺旋式擠壓機和普通擠壓機所不可比擬的。
●模頭和模套經過特殊改良,使換模和換料節約了大量的時間,減少了三分之二的勞動強度有效的提高了生產效率。
●根據生產需要,由光電感應設定棒材特定長度,可自動或手工切斷,感應器控制切斷時間。
●Zhongwu extruder solves the issue of uneven density over the blanks - a common one that is faced by ordinary molding equipments. Blanks produced by Yuchang extruder have a smooth, even and bubble- Iree surlace。The main engine is Programmable Logic Controlled (PLC). speed variable, whose vollage is rogulated electronically, and pressure aulomatically decompressed. Touch screen and manual control panel can be included upon request.
●Material cylinder can be automaically turned over 10 lcitate loading. It is designed with large capacity.non- possession of material, easiness to clean. It outpaces all spiral extrusion machine and/or general extrusion machines.
●Alter the special improvement on die head and die cases, time used to change moulds and materials arecut substantially to 1/3 ol the original; thus increases the production fficiency.
●Users can set the length of extruded bar, decide to cut them off automatically or manually based on production needs. Sensor will control the time ftor cutting oll, and ensure tha materials are not rubbed or touched.

2、主要技術參數Main Technical Parameters