看了真空腔體水氣解吸附組件的用戶又看了
留言詢價
虛擬號將在 180 秒后失效
使用微信掃碼撥號
儀器簡介：
The ZCUVE represents the most recent advance in water vapor desorption technology. The unique design is scalable from 2.75” to 8” flange sizes with a proportionally higher UV power factor with larger flange sizes.
The ZCUVE was designed to desorb water from large deposition chambers where it is not practicable to have an exposed UV emitter inside the vacuum chamber. Standard off-the-shelf shutters can be used to prevent the ZCUVE from being coated during deposition processes.
This process works best on o-ring (Viton) sealed vacuum chambers that do not have any other way to bake out， and also for smaller sized load-locks.技術參數：
| 型號 | 法蘭口徑 |
|---|---|
| Z275 | 2.75" / 40 CF |
| Z450 | 4.5" / 63 CF |
| Z600 | 6.0” / 100 CF |
| Z800 | 8.0” / 160 CF |
An external assembly houses the UV emitter， which is situated just behind a high UV transmission， ultra-high vacuum window. A mirror on the back side of the emitter further improves the transmission of 185 nm UV radiation through the window and into the vacuum chamber. The ZCUVE housing is backfilled with an inert gas to prevent ozone production within the housing. Finally， the emitter leads are connected via MHV high voltage connectors to the control.
ZCUVE - Shutter Closed | ZCUVE - Shutter Open |
主要特點：
The advantage of using UVC radiation to desorb water vapor is that is produces very
little heat. Less heat means less damage
to mechanical parts and samples.
Another advantage is that UVC does not require a direct line of site in order to desorb
water vapor. It can’t get into nooks and
crannies， but it can reflect off of polished surfaces (like chamber walls) with
a loss of 50% to 70% per " bounce" .
The UVB-100 uses UVC radiation to desorb water vapor without heat. The emitter extends into the vacuum chamber.
The ZCUVE (Zero Clearance UV Emitter Water Vapor Desorption System) uses UVC radiation to desorb water vapor without heat. The emitter resides outside the vacuum chamber.
Note:These water vapor desorption products are designed to work with high vacuum systems， large vacuum， chambers， and load locks. They are not designed to replace radiant bake-out methods in ultra-high vacuum systems， but are UHV compatible
暫無數據！
真空腔體水氣解吸附組件的工作原理介紹？真空腔體水氣解吸附組件的使用方法？真空腔體水氣解吸附組件多少錢一臺？真空腔體水氣解吸附組件使用的注意事項真空腔體水氣解吸附組件的說明書有嗎？真空腔體水氣解吸附組件的操作規程有嗎？真空腔體水氣解吸附組件的報價含票含運費嗎？真空腔體水氣解吸附組件有現貨嗎？真空腔體水氣解吸附組件包安裝嗎？
手機版：
工商已核實
